DATAPUISTOKEMISTI

This is updated version of my original post. I purchased additional modem that's externally identical to old one but had different serial port USB ID (USB\VID_12D1&PID_1442&MI_00) missing from earlier driver pack causing original instructions to fail. I have also included latest Stick-mode firmware 21.200.07.00.805 I've found and corrected some incorrect information on original post. Modern Huawei USB LTE modems can be used in two very different modes. Default is HiLink mode where it functions as router doing NAT and other nastiness much like more traditional 4G routers connected over WLAN or Ethernet. Unsurprisingly default mode is HiLink, but luckily it can be changed to Stick mode getting rid at least one layer of NAT and related issues. Actually there's also third mode which is subset of Stick, instead of native NCM interface it uses legacy PPP over emulated serial port. This can be sometimes useful with older routers with USB port but you won't be able ...

For 32-bit source to 64-bit see my older post . Old install was using software RAID-1, but did not have LVM. Small 200MB /boot partition, 8GB swap and rest as one root partition. We're redoing it completely so what it used to be doesn't really matter. All existing data on root will be lost.