Inside Ukkomobile 450MHz LTE router - Huawei B593s-31A



450MHz LTE is alive!

Ukkomobile aka Ukkoverkot is currently building 450MHz LTE network in Finland. I received one of CPEs they use and it turned out to be Huawei B593s-31A with V100R001C01SPC002 firmware dated 2014-09-12. This is Android based device unlike B593u which is more traditional embedded Linux based on Broadcom code.

Since it's LTE there's SIM card like in any other 2G/3G/4G WWAN router. APN name is UkkoNet, MNC is 035 and MCC 244. Login admin, password admin and encrypted configuration file just like B593u and other B593s revisions.

Internal construction of B593s series is also quite different from older routers. There's small brains board with HiSilicon chip, some flash and RF side. Mainboard has Broadcom Wifi, Marvell Ethernet, some VoIP FXS chips and power supply.


OUTSIDE:




INSIDE:





THE GOOD STUFF:

BCM43236BKMLG, HE1423 P21

32178-FM1, 1419BLK0FY 

MARVELL 88E6071-NNC2, EP2119.5JW

 WDU1CPM0A12 VER. B RF HDI


DIAG connectors

 Hi6451GBC, 110CN1414, CP2071414

77192-14, 5541269


 Mainboard connector


HiSilicon Balong Hi6920, Hi6920GFC, 100, HP2561412
SK hynix, H9DA4VH2GJAM, CR4EM 352A
ANALOG DEVICES, AD80277BBCZ, #1347, 2738745.1

PCA9555, CDW012

Comments

  1. Hey. How to translate a router in the boot mode, use testpoint/bottpoint? What contact groups should I put a jumper on?

    ReplyDelete

Post a Comment

Got something to say?!